ZD038 Side Mounted Motor
Mid-Drive Motors & Geared Motors
ZD038 Side Mounted Motor
The ZD038 is a 4000 W side-mounted motor for electric motorcycles, operating at 48–96 V with up to 6000 W peak output, 900 rpm rated speed and IP65 protection. It is supplied by our manufacturing partner; full specifications and dimensions are listed below.
- Rated bus voltage: 48V-96V
- Rated power: 4000W
- Peak power: 6000W
- Rated speed: 900rpm
- Peak torque: 180N.m
Dimensions
Technical Specifications
| Rated bus voltage | 48V-96V |
| Rated power | 4000W |
| Peak power | 6000W |
| Rated speed | 900rpm |
| Peak torque | 180N.m |
| Maximum efficiency | ≤88% |
| Protection level | IP65 |
| Insulation level | B |
| Position sensor type | HALL/GMR |
| Temperature sensor model | KTY84-150 |
| Gear ratio | 6.7:1 |
| Transmission form | Gear drivers |
| Flat Fork Opening Size | 241±1 |
| Motor weight | 18.5KG |
| Cooling Method | Natural cooling |
Frequently Asked Questions
What voltage is this motor rated for?
This motor is rated for 48V-96V operation. Please confirm your battery pack voltage matches before ordering.
What is the rated and peak power of this motor?
The rated power is 4000W, and peak power reaches 6000W for short-duration high-load operation.
What are the speed and torque ratings?
Rated speed is 900rpm; peak torque is 180N.m. Actual performance depends on the controller settings and the load.
What is the protection level of this motor?
The motor is rated IP65, so it is protected against dust and water ingress to that level when the housing and connectors are properly sealed.
Which position sensor does this motor use?
It uses a HALL/GMR position sensor, providing accurate rotor position feedback for smooth and efficient operation.
Can the specification be changed for bulk orders?
This model is supplied as a standard catalog product with fixed specifications – the motor itself cannot be modified. If you need a different voltage or power rating, we can recommend an alternative model from the same series. Please send us your target specification and we will advise the closest option.
Interested in this motor?
Contact us for pricing, samples and customization.